Sensor integration with input modules
Input modules accept and interpret signals from third‑party detectors and switches, enabling their use within the Jablotron alarm environment.
Use them to capture events, trigger automation rules or monitor external equipment through the alarm system.
Designed for flexible I/O expansion and compatibility with d...
Sensor integration with input modules
Input modules accept and interpret signals from third‑party detectors and switches, enabling their use within the Jablotron alarm environment.
Use them to capture events, trigger automation rules or monitor external equipment through the alarm system.
Designed for flexible I/O expansion and compatibility with diverse sensor types.
-
Reference: JA-114HN
Brand: JABLOTRON ALARMS S.A.
BUS 4 I and 4 O I/Omodule JA-114HN
JA-114HN is a BUS I/O module for JABLOTRON 100/100+ adding 4 wired inputs with configurable EOL balancing, 4 galvanically isolated PG/OC outputs (500 mA/38 V each) and an auxiliary +U supply with electronic fuse (max. 200 mA). Occupies 4 panel addresses and includes front and rear tamper.
-
Reference: JA-111H-AD TRB
Brand: JABLOTRON ALARMS S.A.
Bus module for system control JA-111H-AD TRB
The JA-111H-AD TRB is an addressable BUS module for integrating and powering external control devices in the JABLOTRON 100+ system. It supplies power from the panel BUS (12 V DC, 9–15 V), has three inputs (tamper, programmable, fault/secondary control) and supports PG control with activation time 0.1–300 s.
-
Reference: JA-112M
Brand: JABLOTRON ALARMS S.A.
BUS module for magnetic detectors JA-112M
The JA-112M is a BUS module for the JABLOTRON 100+ system for connecting wired magnetic contacts. It provides two independent, fully configurable inputs (unbalanced, single/double balanced or roller mode) and supports up to 100 m cable per input.
-
Reference: JA-110M
Brand: JABLOTRON ALARMS S.A.
Module for magnetic detectors JA-110M
JA-110M is a BUS module for connecting wired magnetic door/window contacts with two independent inputs. Each input is programmable as NC or NO, or can be monitored with an end‑of‑line (EOL) resistor. Bus‑powered, standby current ~3 mA, dimensions 40×100×22 mm.
-
Reference: JA-118M
Brand: JABLOTRON ALARMS S.A.
Module for magnetic detectors JA-118M
The JABLOTRON JA-118M is an addressable BUS module for the JABLOTRON 100 system providing eight programmable inputs for wired magnetic contacts. Each input can be set as NC, balanced/impulse or a special "roller shutter" mode. Max loop length per input is 100 m; fits JA-190PL or KU-68 mounting boxes.
-
Reference: JA-116H
Brand: JABLOTRON ALARMS S.A.
BUS expander – 16 inputs JA-116H
The JA-116H is a BUS expander for JABLOTRON 100+ that powers and supervises up to 16 wired detectors with contact outputs. Inputs are individually configurable (single/double balanced, NC/NO) with selectable end resistors 1k–10k. The module occupies 16 system addresses.
-
Reference: JA-111H TRB
Brand: JABLOTRON ALARMS S.A.
Module interface JA-111H TRB
The JA-111H TRB is an addressable BUS module for integrating wired detectors into the JABLOTRON 100+ system. It powers detectors up to 50 mA and reports alarm, tamper and fault/masking. Supports latch or pulse modes and adjustable trigger time 0.1–300 s.
-
Reference: JA-162M
Brand: JABLOTRON ALARMS S.A.
JA-162M Wireless module with two universal inputs
The JA-162M is a Jablotron wireless input module with two independent universal inputs and an option to connect a tamper contact. It integrates wired detectors into the system without separate power wiring to the detector.
