The JA-82T is a bus-powered USB interface cable for connecting a PC to Jablotron OASiS control panels using the HID standard, so no drivers are required. It provides opto/galvanic isolation to protect the panel from PC-borne interference and supports direct text transfer from OLink to JA-81F wireless keypads. Not suitable for JA-6 series panels.
Warning: Last items in stock!
Availability date:
Prijavite se da bi vidjeli cijene
JA-82T USB PC interface cable
The JA-82T is a bus-powered USB interface cable for connecting a PC to Jablotron OASiS control panels using the HID standard, so no drivers are required. It provides opto/galvanic isolation to protect the panel from PC-borne interference and supports direct text transfer from OLink to JA-81F wireless keypads. Not suitable for JA-6 series panels.
Recipient :
* Required fields
or Cancel
The JA-82T connects Jablotron OASiS control panels to a computer running OLink software. By implementing the HID standard the interface removes the need to install additional drivers on the PC, simplifying programming and configuration tasks.
Opto/galvanic isolation separates the computer circuitry from the control panel bus, reducing interference and protecting the panel from disturbances originating in the PC. The cable supports direct transfer of text messages from OLink to JA-81F wireless keypads; transfer to JA-80F is not supported.
Key technical specifications:
Cable extension and installation notes:
USB can be extended with a standard USB extension cable up to 5 m. The RJ connector can be extended using the CT-04 cable up to 10 m; with a suitable twisted pair the data and power pairs can reach up to 100 m. Follow the connection scheme: the two middle RJ pins are data (one pair), the outer pins carry power (second pair).
The JA-82T is intended solely for programming and configuration of OASiS systems via OLink. Always follow the control panel manufacturer's installation and safety instructions.
Reference: BP12-18
Manufacturer: JABLOTRON ALARMS S.A.
Jablotron BP12-18 is a compact backup power supply for 12 V DC devices. It...
Reference: VOD-JA-107K
Manufacturer: JABLOTRON ALARMS S.A.
A cable with a fuse holder, 6.3 A fuse and connector for connecting the...
Reference: PLV-JA85PG
Manufacturer: JABLOTRON ALARMS S.A.
Alternative gray housing for JA-85P and JA-85B detectors.
Reference: HLK-PM12JBT
Manufacturer: JABLOTRON ALARMS S.A.
Miniature switching power supply can be used wherever needed. 12 V power...
Reference: JA-192E-WH
Manufacturer: JABLOTRON ALARMS S.A.
The JA-192E-WH is a control segment for access modules JA-112E, JA-113E,...
Reference: AN-08-1.5
Manufacturer: JABLOTRON ALARMS S.A.
Self-adhesive antenna for CA-2103 (CA-180x, CU-08), GSM 900 / 1800MHz, cable...
Reference: PLV-CP-M
Manufacturer: JABLOTRON ALARMS S.A.
Reference: AN-868-2PIN
Manufacturer: JABLOTRON ALARMS S.A.
The AN-868 outdoor antennas are designed to extend the communication range of...
Reference: PLV-CP-L
Manufacturer: JABLOTRON ALARMS S.A.
Intended for: JA-106K JA-107K JA-83K JA-120Z BP12-18
Reference: PLV-CP-M.01
The PLV-CP-M.01 is a replacement cover for Jablotron 100+ control panels....
Reference: PP-TOKEN
PP-TOKEN is a promotional keychain from JABLOTRON's catalogue, intended as a...