Multifunctional control relay AC-160-DIN

AC-160-DIN is a wireless multifunction relay for DIN‑rail mounting. When enrolled in a JABLOTRON 100+ control panel it mirrors selected PG outputs; it can also operate standalone and register up to 64 JA‑15x devices in autonomous mode.

The relay provides a galvanically isolated switching contact for 230 V loads. Resistive load rating is up to 16 A; inductive/capacitive loads are limited to 8 A, and halogen loads up to 1000 W. For motor loads or high inrush devices use appropriate contactors to protect the relay.

Available response modes (configurable per device or PG output):

• NATURAL – copies the state of the control device;
• IMPULSE – single pulse;
• STATUS CHANGE – toggles state on each activation;
• SWITCH OFF – cuts power to the switched device;
• BLOCK – freezes relay operation.

The module includes a front push‑button for manual control and supports firmware updates via micro‑USB. Communication uses 868.1 MHz (Jablotron protocol) with an internal antenna and the option to connect an external AN‑868 antenna.

Key technical data:

• Supply: 230 V / 50 Hz
• Power consumption (min/max): 0.5 W / 1.7 W
• Communication: 868.1 MHz, Jablotron protocol
• Contact rating: max. 250 V AC; resistive max. 16 A; inductive/capacitive max. 8 A; halogen max. 1000 W; minimum DC switching power 0.5 W
• Recommended wiring: max. 2 × 1.5 mm² or 1 × 2.5 mm²
• Protection: IP‑20 (IP‑40 with front cover)
• Dimensions: 18 × 90 × 64 mm; weight: 65 g
• Operating temperature: -10 °C to +40 °C; 75 % RH (no condensation)

AC‑160‑DIN is suited for compact control of lighting and auxiliary loads within alarm automation or building control setups. Its addressability and operating modes allow flexible behaviour in both integrated systems and standalone installations.