> >>>Module interface JA-111H TRB
Bus module interface for wire detector JA-111H TRB View larger

Module interface JA-111H TRB

JA-111H TRB

New product

JABLOTRON ALARMS S.A.

The JA-111H TRB is an addressable BUS module for integrating wired detectors into the JABLOTRON 100+ system. It powers detectors up to 50 mA and reports alarm, tamper and fault/masking. Supports latch or pulse modes and adjustable trigger time 0.1–300 s.

More details

More info

JA-111H TRB is an addressable BUS interface module for connecting wired detectors (contact NC/NO or pulse outputs) to the JABLOTRON 100+ control panel. The module supplies power to the detector and reports detector activation, tamper (sabotage) and device fault or masking signals.

The unit provides three inputs: a fixed tamper input, an alarm input and a fault/masking input. It supports both status‑holding (latch) and pulse activation modes. The minimum activation time for alarm triggering is adjustable from 0.1 s to 300 s, allowing flexible filtering of short pulses.

Power is taken from the BUS (12 V DC, range 9…15 V). The module's nominal current consumption is approximately 8 mA (maximum up to 12 mA for cable sizing). The maximum current available to a connected detector is 50 mA. Note that the module's power output is not protected against overload; total connected device current must be observed.

JA-111H TRB is very compact (16 × 30 × 12 mm, weight 8 g) and can be installed directly inside a detector enclosure or mounted externally using extension leads in a protected housing. It is also suitable for connecting specific devices such as the CT-01 roller‑blind detector and can be used in setups that control programmable PG outputs.

As an addressable device it occupies one BUS address within the JABLOTRON 100+ system. When mounted in an appropriate certified enclosure, the module meets Security Grade 2 / Environmental Class II requirements (EN 50131‑1, EN 50131‑3, ACE type B).

Installer note: Installation and configuration should be carried out by an authorised trained technician. Always disconnect system power before wiring and observe maximum current limits of connected devices.

Download

EU certifikat JA-111H TRB

Download (1.53M)

Dekl. o sukladnosti JA-111H TRB

Download (170.05k)

Teh. specifikacija JA-111H TRB

Download (183.31k)

Accessories

  • Multipurpose installation box JA-190PL

    Reference: JA-190PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-190PL

    JA-190PL is a multipurpose ABS mounting box for JABLOTRON 100 modules. It provides cable entries and internal fixing points for tidy wiring and module attachment. Dimensions 90 × 90 × 34 mm, enclosure rating IP40.

  • Installation box JA-194PL

    Reference: JA-194PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-194PL

    The JA-194PL is a medium installation box for Jablotron modules, equipped with front and rear tamper switches. Suitable for input/output modules, signal repeaters and auxiliary hubs. Wall or KU-68 back‑box mounting. Dimensions: 182×132×45 mm.

  • Multipurpose installation box- JA-195PL

    Reference: JA-195PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-195PL

    JA-195PL is a multipurpose mounting box for Jablotron modules, equipped with front and rear tamper switches to detect opening or removal. Size 102 × 102 × 34 mm; suitable for a range of input/output modules and hub devices. Provides tidy cable routing and protection for connectors.

7 other products in the same category:

Follow us on Facebook

Facebook

Information

© Copyright 2026 Jablotron Online. All Rights Reserved.

My account

Newsletter

Follow us

For the best possible shopping experience and optimization of the offer to users, we use various services that use cookies and similar technologies, some of which are absolutely necessary for the operation of this website and do not require consent. Others are used to analyze and improve your user experience, and we and our partners use them to display relevant content in order to provide the best possible information.

By accepting, you agree to the use of analytics services to improve your user experience and display relevant content. You can reject all offered settings or only unnecessary ones or edit your selection at any time in the cookie settings.

Reject.
close