Sealed lead‑acid (VRLA/AGM) 12V 2.3Ah battery for backup use in alarm...
The JA-110Z is an addressable BUS terminal module for the JABLOTRON 100+...
Accessories S-6N panel protection DRC-2UC, DRC-3UC, DR-4UC
AHD/TVI/CVI/CVBS BULLET, 6-22mm 2Mp, IP66
Reference: CA-2103SET B
Brand: JABLOTRON ALARMS S.A.
Car alarm set CA2103,CA-550,JA-185B
Reference: BH-80A
Brand: JABLOTRON ALARMS S.A.
Plastic BH-80A holder for five C batteries (LR14, 1.5 V) for Jablotron JA-80A and JA-180A outdoor sirens. Enables replacing the original BAT-80A‑SAFT lithium pack with alkaline cells (nominal 7.5 V); expected backup life typically falls to about 2 years.
Reference: WRE-KU68-BK
Brand: JABLOTRON ALARMS S.A.
WRE-KU68-BK is a black mounting pad for JA-120E-BK and JA-121E-BK. It enables mounting the reader over a KU68 installation box, tidies cable routing and ensures correct alignment. Dimensions: 96 × 96 × 8 mm.
Reference: JA-114HN
Brand: JABLOTRON ALARMS S.A.
JA-114HN is a BUS I/O module for JABLOTRON 100/100+ adding 4 wired inputs with configurable EOL balancing, 4 galvanically isolated PG/OC outputs (500 mA/38 V each) and an auxiliary +U supply with electronic fuse (max. 200 mA). Occupies 4 panel addresses and includes front and rear tamper.
Reference: JA-110B
Brand: JABLOTRON ALARMS S.A.
The JA-110B detects breaking of window panes and other glass surfaces using dual GBS technology (acoustic analysis combined with air-pressure change detection). BUS-powered and communicating, it features adjustable sensitivity and a SMART MEMORY LED. Detection range up to 9 m; minimum glass area 0.6 × 0.6 m.
Reference: JA-120Z
Brand: JABLOTRON ALARMS S.A.
The JA-120Z is a BUS booster for JABLOTRON 100 that increases bus power, extends loop length and provides galvanic isolation. Output DC 13.5 V/2 A, two independent outputs up to 500 m each; supports 12 V backup battery 7–18 Ah. PLV-CP-L enclosure sold separately.
Reference: JA-110N-DIN
Brand: JABLOTRON ALARMS S.A.
PG output module for DIN rail,provides a power relay output.
Reference: JA-116H
Brand: JABLOTRON ALARMS S.A.
The JA-116H is a BUS expander for JABLOTRON 100+ that powers and supervises up to 16 wired detectors with contact outputs. Inputs are individually configurable (single/double balanced, NC/NO) with selectable end resistors 1k–10k. The module occupies 16 system addresses.
Reference: JA-110F
Brand: JABLOTRON ALARMS S.A.
The JABLOTRON JA-110F is a BUS flood detector for early detection of water presence (basements, bathrooms). It reports status to the control panel via the digital BUS, has no tamper and occupies one system address.
Reference: JA-110TP
Brand: JABLOTRON ALARMS S.A.
The JA-110TP is an addressable BUS room thermostat for the JABLOTRON 100+ system. It supports MyJABLOTRON integration, weekly scheduling, manual and ECO modes, Standby and open-window/tamper detection.
Reference: JA-112M
Brand: JABLOTRON ALARMS S.A.
The JA-112M is a BUS module for the JABLOTRON 100+ system for connecting wired magnetic contacts. It provides two independent, fully configurable inputs (unbalanced, single/double balanced or roller mode) and supports up to 100 m cable per input.
Reference: JA-111H-AD TRB
Brand: JABLOTRON ALARMS S.A.
The JA-111H-AD TRB is an addressable BUS module for integrating and powering external control devices in the JABLOTRON 100+ system. It supplies power from the panel BUS (12 V DC, 9–15 V), has three inputs (tamper, programmable, fault/secondary control) and supports PG control with activation time 0.1–300 s.
Reference: JB-EXT-TH-B
Brand: JABLOTRON ALARMS S.A.
BUS outdoor temperature detector JB-EXT-TH-B for integration with JABLOTRON 100+. Measures with internal sensor or external PT1000 probe (JB-TS-PT1000, -50 °C … +200 °C). Supports MyJABLOTRON charts, alerts and PG switching; IP53 enclosure, powered from BUS.