Categories
- Alarms
- Tools
- IoT systems
- Video surveillance
- Intercoms
- Smarthome
- Power supply
- Access control
- Rekuperacija
Top sellers
-
12V 2.3Ah Sealed Lead‑Acid Battery
Sealed lead‑acid (VRLA/AGM) 12V 2.3Ah battery for backup use in alarm...
-
Addressable terminal module JA-110Z
The JA-110Z is an addressable BUS terminal module for the JABLOTRON 100+...
-
S-6N
Accessories S-6N panel protection DRC-2UC, DRC-3UC, DR-4UC
-
Camera COD-VF4HQ FullHD
AHD/TVI/CVI/CVBS BULLET, 6-22mm 2Mp, IP66
List of products by manufacturer JABLOTRON ALARMS S.A.
-
Reference: JA-110N-DIN
Brand: JABLOTRON ALARMS S.A.
BUS DIN power output module JA-110N-DIN
PG output module for DIN rail,provides a power relay output.
-
Reference: JA-116H
Brand: JABLOTRON ALARMS S.A.
BUS expander – 16 inputs JA-116H
The JA-116H is a BUS expander for JABLOTRON 100+ that powers and supervises up to 16 wired detectors with contact outputs. Inputs are individually configurable (single/double balanced, NC/NO) with selectable end resistors 1k–10k. The module occupies 16 system addresses.
-
Reference: JA-110F
Brand: JABLOTRON ALARMS S.A.
Bus flood detector JA-110F
The JABLOTRON JA-110F is a BUS flood detector for early detection of water presence (basements, bathrooms). It reports status to the control panel via the digital BUS, has no tamper and occupies one system address.
-
Reference: JA-110TP
Brand: JABLOTRON ALARMS S.A.
Bus indoor thermostat JA-110TP
The JA-110TP is an addressable BUS room thermostat for the JABLOTRON 100+ system. It supports MyJABLOTRON integration, weekly scheduling, manual and ECO modes, Standby and open-window/tamper detection.
-
-
Reference: JA-112M
Brand: JABLOTRON ALARMS S.A.
BUS module for magnetic detectors JA-112M
The JA-112M is a BUS module for the JABLOTRON 100+ system for connecting wired magnetic contacts. It provides two independent, fully configurable inputs (unbalanced, single/double balanced or roller mode) and supports up to 100 m cable per input.
-
Reference: JA-111H-AD TRB
Brand: JABLOTRON ALARMS S.A.
Bus module for system control JA-111H-AD TRB
The JA-111H-AD TRB is an addressable BUS module for integrating and powering external control devices in the JABLOTRON 100+ system. It supplies power from the panel BUS (12 V DC, 9–15 V), has three inputs (tamper, programmable, fault/secondary control) and supports PG control with activation time 0.1–300 s.
-
Reference: JB-EXT-TH-B
Brand: JABLOTRON ALARMS S.A.
Bus outdoor thermometer JB-EXT-TH-B
BUS outdoor temperature detector JB-EXT-TH-B for integration with JABLOTRON 100+. Measures with internal sensor or external PT1000 probe (JB-TS-PT1000, -50 °C … +200 °C). Supports MyJABLOTRON charts, alerts and PG switching; IP53 enclosure, powered from BUS.
-
Reference: JA-120PW
Brand: JABLOTRON ALARMS S.A.
Bus PIR& MW motion detector JA-120PW
The JA-120PW is a BUS motion detector combining passive infrared (PIR) and microwave (MW) sensors to minimise false alarms. The MW module is activated only after PIR detection. Addressable device, powered from the control panel BUS (12 V DC).
-
Reference: JA-110N
Brand: JABLOTRON ALARMS S.A.
Bus power output module JA-110N
PG, BUS, a switching relay (16 A) with NO or NC modes.
-
Reference: JA-111N
Brand: JABLOTRON ALARMS S.A.
BUS signal output module JA-111N
Bus signal output module, PG, offers a switching relay (2 A/60V DC) with NO or NC modes.
-
Reference: JA-110Z-A
Brand: JABLOTRON ALARMS S.A.
BUS terminal module JA-110Z-A
The JA-110Z-A is an addressable BUS splitter for the JABLOTRON 100+ system, intended to branch and interconnect BUS lines inside the protected premises. It includes a pair of tamper contacts and auxiliary terminals for wired zones. Supplied for mounting in a JA-190PL enclosure and occupies one device position in the system.
-
Reference: JA-110Z-B
Brand: JABLOTRON ALARMS S.A.
Bus terminal module JA-110Z-B
The JA-110Z-B is a BUS terminal module for connecting and branching JA-100 bus lines. It installs into the JA-190PL enclosure, tidies wiring runs and simplifies multi-branch installations and later servicing. Specs: max 42 V AC / 60 V DC, max 2 A.
-
Reference: JA-110Z-C
Brand: JABLOTRON ALARMS S.A.
Bus terminal module JA-110Z-C
Passive BUS terminal module for the JA‑100 bus. Fits into a JA‑190PL mounting box and provides screw-terminals for tidy branching and centralised terminations. No active electronics or addressing. Max 42 V AC / 60 V DC, 2 A.
-
Reference: JA-156J
Brand: JABLOTRON ALARMS S.A.
Button for silent alarm - JA-156J
Wireless button JA-156J
-
Reference: JA-112J
Brand: JABLOTRON ALARMS S.A.
Button JA-112J
BUS emergency/control wall-mounted button
