Categories
- Alarms
- Tools
- IoT systems
- Video surveillance
- Intercoms
- Smarthome
- Power supply
- Access control
- Rekuperacija
Top sellers
-
12V 2.3Ah Sealed Lead‑Acid Battery
Sealed lead‑acid (VRLA/AGM) 12V 2.3Ah battery for backup use in alarm...
-
Addressable terminal module JA-110Z
The JA-110Z is an addressable BUS terminal module for the JABLOTRON 100+...
-
S-6N
Accessories S-6N panel protection DRC-2UC, DRC-3UC, DR-4UC
-
Camera COD-VF4HQ FullHD
AHD/TVI/CVI/CVBS BULLET, 6-22mm 2Mp, IP66
List of products by manufacturer JABLOTRON ALARMS S.A.
-
Reference: AN-08-1.5
Brand: JABLOTRON ALARMS S.A.
AN-08-1.5 Self-adhesive GSM antenna
Self-adhesive antenna for CA-2103 (CA-180x, CU-08), GSM 900 / 1800MHz, cable 1.5 m
-
Reference: AN-13GPS
Brand: JABLOTRON ALARMS S.A.
AN-13GPS.01 Magnetic GPS Antenna
Magnetic GPS antenna, SMA connector. Can be used with CA-2103 Athos (CA-1803, CU-08).
-
Reference: AN-868-2PIN
Brand: JABLOTRON ALARMS S.A.
AN-868-2PIN Outdoor Antenna
The AN-868 outdoor antennas are designed to extend the communication range of Jablotron wireless security system devices using the 868 MHz frequency.
-
-
Reference: CA-2103SET B
Brand: JABLOTRON ALARMS S.A.
Auto alarm set CA2103,CA-550,JA-185B
Car alarm set CA2103,CA-550,JA-185B
-
-
Reference: BAT-3V0-CR2354
Brand: JABLOTRON ALARMS S.A.
BAT-3V0-CR2354.01 Lithium battery
Lithium battery type CR2354 (3.0 V / 0.56 Ah)
-
Reference: BAT-3V7-2500
Brand: JABLOTRON ALARMS S.A.
BAT-3V7-2500 Li-Polymer baterija (3,7 V / 2500 mAh)
Li-Polymer BAT-3V7-2500 (3.7 V / 2500 mAh) backup battery for Jablotron devices. Commonly used in the JA-156E (NATUS) wireless keypad and compatible models. Provides sustained power during mains failure; replacement by authorized service is recommended.
-
Reference: BAT-3V7-5000
Brand: JABLOTRON ALARMS S.A.
BAT-3V7-5000 Li-Polymer baterija (3,7 V / 5000 mAh)
The BAT-3V7-5000 is a Li‑Polymer replacement/backup battery (3.7 V / 5000 mAh) for powering and providing backup to security and alarm control panels. Compatible with Jablotron Mercury panels (e.g., JA-152KRY). Follow the control panel maker’s replacement procedure.
-
Reference: BH-80A
Brand: JABLOTRON ALARMS S.A.
Battery holder BH-80A
Plastic BH-80A holder for five C batteries (LR14, 1.5 V) for Jablotron JA-80A and JA-180A outdoor sirens. Enables replacing the original BAT-80A‑SAFT lithium pack with alkaline cells (nominal 7.5 V); expected backup life typically falls to about 2 years.
-
Reference: BB-02
Brand: JABLOTRON ALARMS S.A.
BB-02 Backup Battery
BB-02 is an auxiliary battery equipped with its own electronics to take control of the power supply. It is intended for use with CA-1803 and CA-1802 car alarms.
-
Reference: BB-03
Brand: JABLOTRON ALARMS S.A.
BB-03 Spare battery for CA-2103, CU-08A
Spare battery for CA-2103 and CU-08A.
-
Reference: WRE-KU68-BK
Brand: JABLOTRON ALARMS S.A.
Box for JA-120E-BK black
WRE-KU68-BK is a black mounting pad for JA-120E-BK and JA-121E-BK. It enables mounting the reader over a KU68 installation box, tidies cable routing and ensures correct alignment. Dimensions: 96 × 96 × 8 mm.
-
Reference: JA-114HN
Brand: JABLOTRON ALARMS S.A.
BUS 4 I and 4 O I/Omodule JA-114HN
JA-114HN is a BUS I/O module for JABLOTRON 100/100+ adding 4 wired inputs with configurable EOL balancing, 4 galvanically isolated PG/OC outputs (500 mA/38 V each) and an auxiliary +U supply with electronic fuse (max. 200 mA). Occupies 4 panel addresses and includes front and rear tamper.
-
Reference: JA-110B
Brand: JABLOTRON ALARMS S.A.
Bus acoustic glass-break detector JA-110B
The JA-110B detects breaking of window panes and other glass surfaces using dual GBS technology (acoustic analysis combined with air-pressure change detection). BUS-powered and communicating, it features adjustable sensitivity and a SMART MEMORY LED. Detection range up to 9 m; minimum glass area 0.6 × 0.6 m.
-
Reference: JA-120Z
Brand: JABLOTRON ALARMS S.A.
Bus back-up booster unit JA-120Z
The JA-120Z is a BUS booster for JABLOTRON 100 that increases bus power, extends loop length and provides galvanic isolation. Output DC 13.5 V/2 A, two independent outputs up to 500 m each; supports 12 V backup battery 7–18 Ah. PLV-CP-L enclosure sold separately.
