JA-115E-AN Bus four-segment keypad with display and RFID reader - anthracite

JA-115E-AN is a wired BUS-connected four-segment keypad with an LCD display and integrated 125 kHz RFID reader. It offers local control and clear status indication for the JABLOTRON 100+ alarm system, including date/time display.

Each segment can be configured using the F‑Link software for section control, segment status indication, panic activation and PG output control. The keypad supports DAY/NIGHT modes (including a silent NIGHT mode) and access authorization options; settings can be copied between keypads to speed up installation.

The device is powered from the control panel bus and must be installed and enrolled by authorised personnel following the manufacturer instructions. Manufacturer type designation: 1KPAD2201LU.

Technical specifications

• Type of control device: B
• Power: from control panel bus 12 V DC (8–15 V)
• Current consumption (standby): 18 mA
• Current consumption on key/cable selection: 150 mA
• RFID frequency: 125 kHz
• Maximum RFID magnetic field strength: -5.4 dBμA/m (measured at 10 m)
• Dimensions: 110 x 136 x 33 mm
• Weight: 285 g
• Classification: Security grade 2 / Environmental class II (EN 50131-1)
• Environment: indoor general
• Operating temperature range: -10 °C to +40 °C
• Average operational humidity: 75% RH, non‑condensing
• Certification body: Trezor Test s.r.o. (nr. 3025)
• Compliance: ETSI EN 300 330, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-3
• Can be operated according to: ERC REC 70-03
• Recommended screw: 4 x ø 3.5 x 40 mm (half‑round head)

Installation and registration must be performed by authorised installers. Technical values match the official manufacturer datasheet.