Sealed lead‑acid (VRLA/AGM) 12V 2.3Ah battery for backup use in alarm...
The JA-110Z is an addressable BUS terminal module for the JABLOTRON 100+...
Accessories S-6N panel protection DRC-2UC, DRC-3UC, DR-4UC
AHD/TVI/CVI/CVBS BULLET, 6-22mm 2Mp, IP66
Reference: JA-118M
Brand: JABLOTRON ALARMS S.A.
The JABLOTRON JA-118M is an addressable BUS module for the JABLOTRON 100 system providing eight programmable inputs for wired magnetic contacts. Each input can be set as NC, balanced/impulse or a special "roller shutter" mode. Max loop length per input is 100 m; fits JA-190PL or KU-68 mounting boxes.
Reference: JA-111H TRB
Brand: JABLOTRON ALARMS S.A.
The JA-111H TRB is an addressable BUS module for integrating wired detectors into the JABLOTRON 100+ system. It powers detectors up to 50 mA and reports alarm, tamper and fault/masking. Supports latch or pulse modes and adjustable trigger time 0.1–300 s.
Reference: JS-25
Brand: JABLOTRON ALARMS S.A.
Motion detector / acoustic glass breakage detector JS-25
Reference: JA-188P
Brand: JABLOTRON ALARMS S.A.
The JA-188P is an outdoor wireless PIR motion detector for JABLOTRON 100/100+, featuring Optex dual‑zone optics with an 85° coverage and up to 12 m range (94 segments). Powered by 3×LS(T)14500 (AA 3.6 V, 2 Ah), IP55. Discontinued; replacement JA-158P.
Reference: JA-111P-WG
Brand: JABLOTRON ALARMS S.A.
JA-111P-WG Bus PIR motion detector with a grey lens increases immunity to white light to reduce false alarms from car lights, lightning or reflections. Coverage 90°/12 m; addressable in the JABLOTRON 100+ system and occupies one system position.
Reference: JA-111P-WW
Brand: JABLOTRON ALARMS S.A.
The JA-111P-WW is an addressable BUS PIR motion detector for the JABLOTRON 100+ system. It provides 90°/12 m detection coverage, two selectable false-alarm immunity levels and control of programmable PG outputs for indoor protection.
Reference: JA-112P
Brand: JABLOTRON ALARMS S.A.
BUS passive‑infrared motion detector for the JABLOTRON 100+ system. Detects human movement indoors with 90°/12 m coverage; features impulse activation, two‑level false‑alarm resistance, is addressable and can drive programmable PG outputs.
Reference: JA-15P
Brand: JABLOTRON ALARMS S.A.
Wireless motion detector for JA-10 systems - JA-15P
Reference: JA-120PC
Brand: JABLOTRON ALARMS S.A.
Bus-powered PIR motion detector with an integrated verification camera. Captures colour stills in LQ 320×240 and HQ 640×480, uses flash and IR for night shots, stores images in internal memory and occupies one address in the JABLOTRON 100 system.
Reference: JA-151P-WG
Brand: JABLOTRON ALARMS S.A.
Wireless Jablotron PIR motion detector JA-151P-WG with a grey lens that reduces false alarms from strong white light sources. Coverage up to 12 m, SMART WATCH support and approx. 2 years battery life.
Reference: JA-152P (G)
Brand: JABLOTRON ALARMS S.A.
Wireless PIR detector JA-152P (G) for JABLOTRON 100+ with grey lens for enhanced white‑light immunity (up to 10,000 lx). Detection 90°/12 m, powered by 1× CR123A (≈4 years), communication 868.1 MHz, range ~300 m.
Reference: JA-150P PET
Brand: JABLOTRON ALARMS S.A.
Wireless PIR motion detector JA-150P PET for JABLOTRON 100+ with basic pet immunity. Human detection 90°/12 m; pet immunity up to 7 m (pets up to ≈25 kg / 40 cm). Radio 868.1 MHz, powered by 2×LR6 (AA).
Reference: JA-196PL-S
Brand: JABLOTRON ALARMS S.A.
The JA-196PL-S is a compact wall mounting box for JA-1x2P PIR detectors. Available in white and grey, it allows partly flush mounting into plasterboard or masonry walls for a neat, low‑profile finish and consistent detector alignment.
Reference: JA-193PL-F-M-G
Brand: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed box JA-193PL-BOX-M. Designed for JA-1x1P wireless PIR detectors (e.g. JA-151P). Mounting opening: 70 × 136 mm; enables a neat, partly flush installation in plasterboard or masonry walls.
Reference: JA-193PL-F-M-W
Brand: JABLOTRON ALARMS S.A.
White aesthetic frame JA-193PL-F-M-W for the medium (M) wall mounting box. Allows partly recessed installation of JA-1x1P PIR detectors (e.g. JA-151P) into plasterboard or masonry, providing a low-profile, neat finish. Use with JA-193PL-BOX-M.