Sealed lead‑acid (VRLA/AGM) 12V 2.3Ah battery for backup use in alarm...
The JA-110Z is an addressable BUS terminal module for the JABLOTRON 100+...
Accessories S-6N panel protection DRC-2UC, DRC-3UC, DR-4UC
AHD/TVI/CVI/CVBS BULLET, 6-22mm 2Mp, IP66
Reference: JA-193PL-F-S-G
Brand: JABLOTRON ALARMS S.A.
JA-193PL-F-S-G is a gray decorative frame for the small (S) wall-mount PIR box. Used with JA-193PL-BOX-S to achieve a neat, semi-flush installation of JA PIR detectors. S-size mounting holes: 70 × 96 mm. The frame is an aesthetic accessory and does not alter detector electronics.
Reference: JA-193PL-F-S-W
Brand: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount box. Designed for JA-1x1P (e.g. JA-111P) PIR detectors; provides a neat, partially recessed finish. Hole spacing: 70 × 96 mm.
Reference: AC-160-C
Brand: JABLOTRON ALARMS S.A.
AC-160-C is a mounting-box-fitted wireless multifunctional power relay for JABLOTRON 100+. Enrolls to the panel, copies selected PG outputs and switches 230 V loads up to 16 A with galvanic isolation.
Reference: AC-160-DIN
Brand: JABLOTRON ALARMS S.A.
AC-160-DIN is a wireless multifunction DIN‑rail relay for JABLOTRON 100+ integration or standalone use. It offers a galvanically isolated contact for 230 V up to 16 A, five operating modes, a manual push‑button and micro‑USB firmware updates.
Reference: JA-110Z-D
Brand: JABLOTRON ALARMS S.A.
The JA-110Z-D is a BUS terminal splitter for the JABLOTRON 100+ system that organises and connects up to 8 bus branches. By removing internal jumpers the module can be split into two independent branches to simplify maintenance and fault isolation. Intended for indoor mounting in standard junction or Jablotron enclosures.
Reference: JA-192PL-A
Brand: JABLOTRON ALARMS S.A.
Compact plastic enclosure JA-192PL-A for outdoor installation, providing IP65 protection against dust and water jets. Internal dimensions 62×38×20 mm, external 70×62×35 mm. White finish, suitable for small JABLOTRON 100+ modules and accessories.
Reference: JA-163A-BASE-RB
Brand: JABLOTRON ALARMS S.A.
Used to mark alarms outside the building as well as for additional audible signaling of PG output activation or during input-output delay
Reference: JA-151A-BASE-RB
Brand: JABLOTRON ALARMS S.A.
External wireless siren intended for acoustic alarm signaling as well as for signaling activation or deactivation of PG output.
Reference: JA-111A-BASE-RB
Brand: JABLOTRON ALARMS S.A.
BUS external siren - base with electronics.
Reference: JA-180A
Brand: JABLOTRON ALARMS S.A.
Designed to sound an external alarm and to indicate any tampering of guarded area.
Reference: JS-7910
Brand: JABLOTRON ALARMS S.A.
JS-7910 is a replacement "pet" lens for PIR detectors that reduces false alarms caused by household pets. It typically ignores animals up to ~40 cm tall and reduces effective detection range to about 7 m. Check compatibility and test with your pet after fitting.
Reference: JA-120PB
Brand: JABLOTRON ALARMS S.A.
JA-120PB is a BUS combined detector integrating a PIR motion sensor and an acoustic/pressure GBS glass‑break sensor in one enclosure. Designed for indoor protection, it occupies two addresses on the JABLOTRON 100 bus. PIR 110°/12 m, GBS up to 9 m.
Reference: JA-122PW (G)
Brand: JABLOTRON ALARMS S.A.
JA-122PW (G) is a JABLOTRON 100+ bus dual PIR & MW motion detector combining PIR and microwave sensing for reliable coverage up to 12 m. The grey lens improves white‑light immunity to 10000 lux; PIR and MW sensitivity are adjustable separately.