The JS-7904 is a replacement corridor lens for Jablotron JA/JS PIR detectors, creating a narrow, long-range detection beam ideal for hallways. Typical coverage is approximately 25 m long × 3 m wide at the recommended mounting height of 2.5 m; lens swaps without changing detector electronics.
Warning: Last items in stock!
Availability date:
Prijavite se da bi vidjeli cijene
Corridor lens JS-7904
The JS-7904 is a replacement corridor lens for Jablotron JA/JS PIR detectors, creating a narrow, long-range detection beam ideal for hallways. Typical coverage is approximately 25 m long × 3 m wide at the recommended mounting height of 2.5 m; lens swaps without changing detector electronics.
Recipient :
* Required fields
or Cancel
JS-7904 is an interchangeable corridor lens for Jablotron JA and JS series PIR motion detectors. It converts the detector’s standard coverage into a focused, elongated beam suitable for monitoring linear areas such as hallways, passages and stairwells.
In normal installation conditions the lens provides an approximate detection zone of 25 m in length and about 3 m in width at the recommended mounting height of 2.5 m. The concentrated beam reduces side coverage and helps prevent unwanted detections from adjacent areas.
Key benefits:
Installation notes: verify actual coverage on site and adjust detector sensitivity according to room geometry, mounting height and potential heat/motion sources. The JS-7904 is an optical accessory only; system settings and power remain those of the host detector.
Perform functional tests after installing the lens to confirm alignment and ensure the detection beam covers the intended corridor length without generating unwanted detections in nearby zones.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
JA-SOLO C3 test spray for checking EI208W and EI208DW CO detectors. Supplied...
Reference: JS-7910
Manufacturer: JABLOTRON ALARMS S.A.
JS-7910 is a replacement "pet" lens for PIR detectors that reduces false...
Reference: JS-7902
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7902 is a replacement curtain lens for PIR motion detectors that...
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
White aesthetic frame JA-193PL-F-M-W for the medium (M) wall mounting box....
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
JA-191PL articulated bracket for JA-1x1P and JA-1x2P PIR detectors. Enables...
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-S-G is a gray decorative frame for the small (S) wall-mount PIR...
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount box....
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed box...
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
SD-TESTER Test Spray Smoke Sabre, 150 ml — aerosol test spray for functional...
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
Handheld simulator for testing acoustic glass-break detectors. GBT-212 senses...
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The JA-196PL-L bracket is designed for partly flush mounting of dual PIR+MW...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
The GS-208-CO is a plug‑in wired interface module for direct integration into...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
PLV-P-ST is a universal circular ceiling spacer Ø126 mm for smoke, heat and...
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
Lithium battery type CR2354 (3.0 V / 0.56 Ah)
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal...
Reference: JA-150TX-UNI
The Jablotron JA-150TX-UNI is a compact wireless universal transmitter for...