The JS-7902 is a replacement curtain lens for PIR motion detectors that narrows detection to a vertical curtain. Suited for doorways, windows and very narrow aisles; typical working range at 2.5 m mounting height is up to 10 m. Check detector compatibility and test coverage after installation.
Warning: Last items in stock!
Availability date:
Prijavite se da bi vidjeli cijene
Curtain lens JS-7902
The JS-7902 is a replacement curtain lens for PIR motion detectors that narrows detection to a vertical curtain. Suited for doorways, windows and very narrow aisles; typical working range at 2.5 m mounting height is up to 10 m. Check detector compatibility and test coverage after installation.
Recipient :
* Required fields
or Cancel
JS-7902 is an alternative optical lens for PIR detectors that produces a narrow vertical "curtain" detection pattern instead of broad area coverage. It is intended to create a defined detection barrier for crossings (for example doorways or narrow corridors).
By narrowing the detection field the lens helps reduce unwanted alarms caused by movement outside the guarded curtain (small pets, floor-level activity, or general room motion). After fitting an alternative lens always consult the detector manual and perform on-site coverage tests.
The lens is listed as accessory for several Jablotron PIR detectors; verify compatibility with the specific model before installation. Replacing the standard lens changes the detector's coverage and may affect normative compliance for some models (e.g. EN 50131). Test detector coverage and sensitivity after installation.
Applications: creating virtual barriers at entrances, protecting windows or monitoring very narrow aisles where a vertical detection curtain is required.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
For EI208W and EI208DW CO detectors.
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, white, medium
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
Jointed holder for JA-1x1P and JA-1x2P PIR detectors
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, gray, small
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, white, small
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, grey, medium
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
Test spray for smoke and heat detectors, 150 ml
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
For testing acoustic glass-break detectors.
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The bracket has been designed for the installation of a dual PIR and MW...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
This is a plug-in module designed for direct integration in the Ei208W or...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
Universal ceiling circular spacer, for smoke and temperature detectors
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
Lithium battery type CR2354 (3.0 V / 0.56 Ah)
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal use in...