Handheld simulator for testing acoustic glass-break detectors. GBT-212 senses air-pressure changes from glass flexing and plays a breaking-glass sound; manual test button available. Detection range up to 9 m.
Warning: Last items in stock!
Availability date:
Prijavite se da bi vidjeli cijene
Glass Break Simulator GBT-212
Handheld simulator for testing acoustic glass-break detectors. GBT-212 senses air-pressure changes from glass flexing and plays a breaking-glass sound; manual test button available. Detection range up to 9 m.
Recipient :
* Required fields
or Cancel
GBT-212 is a portable tester designed for technicians to verify and calibrate acoustic glass-break detectors without damaging the glazed surface. In automatic mode the unit senses short air-pressure variations caused by the flexing or bending of a glass pane and automatically emits a simulated glass-break sound.
The tester also features a manual mode: when switched on while holding the test button, the device bypasses the pressure sensor and will produce the test sound only when the button is pressed—useful for controlled checks and sensitivity adjustments.
Power supply: 9 V battery (type 1604). Detection range: up to 9 m. Standby current ≈ 6 mA; peak current up to 200 mA. Low-battery indication below 8 V. Automatic shut-off after approx. 10 minutes of inactivity. Dimensions: 70 × 135 × 29 mm. Operating temperature: −10 °C to +40 °C. Environmental class II. Complies with EN 50130-4 and EN 55022.
Maintenance note: use quality alkaline 9 V batteries. Do not place the simulator near the ear and keep out of reach of children. Refer to the manufacturer for service and conformity details.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
JA-SOLO C3 test spray for checking EI208W and EI208DW CO detectors. Supplied...
Reference: JS-7904
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7904 is a replacement corridor lens for Jablotron JA/JS PIR detectors,...
Reference: JS-7910
Manufacturer: JABLOTRON ALARMS S.A.
JS-7910 is a replacement "pet" lens for PIR detectors that reduces false...
Reference: JS-7902
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7902 is a replacement curtain lens for PIR motion detectors that...
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
White aesthetic frame JA-193PL-F-M-W for the medium (M) wall mounting box....
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
JA-191PL articulated bracket for JA-1x1P and JA-1x2P PIR detectors. Enables...
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-S-G is a gray decorative frame for the small (S) wall-mount PIR...
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount box....
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed box...
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
SD-TESTER Test Spray Smoke Sabre, 150 ml — aerosol test spray for functional...
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The JA-196PL-L bracket is designed for partly flush mounting of dual PIR+MW...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
The GS-208-CO is a plug‑in wired interface module for direct integration into...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
PLV-P-ST is a universal circular ceiling spacer Ø126 mm for smoke, heat and...
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
Lithium battery type CR2354 (3.0 V / 0.56 Ah)
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal...
Reference: JA-150TX-UNI
The Jablotron JA-150TX-UNI is a compact wireless universal transmitter for...