SD-283ST Žičani kombinirani detektor dima i topline s ugrađenom sirenom View larger

SD-283ST Wired combined smoke and heat detector with built-in siren

SD-283ST

New product

JABLOTRON ALARMS S.A.

The detector is used to detect fire hazards inside residential or commercial buildings. The detector is also suitable for installation in caravans or mobile homes. The product is not intended for installation in industrial premises.

More details

More info

The detector signals the fire hazard using a built-in LED indicator and sound signal. The detector can also be powered from an external 12 V DC source or from the alarm system control panel and has ALARM and TMP outputs. When used with inserted batteries (3x 1.5 V AA), the detector can continue to operate as a standalone detector when the external 12 V power supply is disconnected.

The SD-283ST consists of two independent detectors - an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to large dust particles found in dense smoke. It is less sensitive to smaller particles resulting from the combustion of liquids such as alcohol. Therefore, the fire detector also has a built-in heat detector that reacts more slowly, but is much better at detecting fires that produce only a small amount of smoke.

Technical specifications
Power 9 – 15 V DC/3.5 mA (150 mA during alarm)
or 3 pcs. alkaline batteries AA (LR6) 1.5 V
Note: Batteries not included
Typical service life approx. 3 years
Smoke detection by optical light scattering
Smoke detector sensitivity m = 0.11 - 0.13 dB/m according to EN 14604:2005, EN 54-7
Heat detection class A1 according to EN 54-5
Alarm temperature + 60 °C to +65 °C
Operating temperature range -10 °C to +70 °C
Dimensions, weight diameter 126 mm, height 52 mm, 150 g
Compliance EN 50130-4, EN 55022
Recommended screw 2x ø 3.5 x 40 mm (countersunk head)

30 other products in the same category:

Follow us on Facebook