The JA-100+ family includes both bus (wired) and wireless motion detectors designed for easy enrollment and configuration within the JA-100+ platform. Devices support adjustable immunity settings to suit different installation environments.
Pet-immune models and acc...
The JA-100+ family includes both bus (wired) and wireless motion detectors designed for easy enrollment and configuration within the JA-100+ platform. Devices support adjustable immunity settings to suit different installation environments.
Pet-immune models and accessory lenses are available to adapt coverage without compromising system compatibility.
Alternative optics for corridors and combined sensor variants (PIR + microwave) are offered for challenging layouts where false alarms need to be minimized. Use the vendor’s configuration tool to tune detector behaviour for compliance and performance.
For business deployments, coordinate device selection and enrollment with your system integrator to document zones and parameters centrally.
Before ordering confirm the detector variant, required accessories (lenses, brackets) and enrollment method. Ensure you have the appropriate service tools or partner support for commissioning.
Proper planning reduces on-site adjustments and speeds up commissioning of larger systems.
Reference: JA-185P
Brand: JABLOTRON ALARMS S.A.
The Jablotron JA-185P is a compact wireless ceiling/wall PIR detector for small rooms and vehicle interiors. It provides 360° coverage up to 5 m, operates on 868.1 MHz and is powered by a single LS(T)14500 lithium cell.
Reference: JA-180P
Brand: JABLOTRON ALARMS S.A.
The Jablotron JA-180P is a wireless indoor PIR motion detector with a tamper contact. It provides 120°/12 m detection, communicates on 868.1 MHz (Jablotron protocol) with an open‑area range of ≈300 m, and is powered by a single CR14500 3.6 V lithium cell (typ. battery life ≈3 years).
Reference: JA-160PC
Brand: JABLOTRON ALARMS S.A.
Wireless PIR motion detector with an integrated camera for video verification in the JABLOTRON 100 system. Records dual‑exposure images (LQ 320×240 and HQ 640×480) and uses a visible flash for low‑light conditions; images are stored locally and sent to the control panel and users.
Reference: JA-110P
Brand: JABLOTRON ALARMS S.A.
The JA-110P is a wired BUS PIR motion detector for indoor protection. Standard lens covers 110° up to 12 m; powered from control panel BUS 12 V DC (9 ... 15 V). Optional SMART MEMORY INDICATION (SMI) and interchangeable lenses JS-7904, JS-7906, JS-7901.
Reference: JA-111P-WG
Brand: JABLOTRON ALARMS S.A.
JA-111P-WG Bus PIR motion detector with a grey lens increases immunity to white light to reduce false alarms from car lights, lightning or reflections. Coverage 90°/12 m; addressable in the JABLOTRON 100+ system and occupies one system position.
Reference: JA-111P-WW
Brand: JABLOTRON ALARMS S.A.
The JA-111P-WW is an addressable BUS PIR motion detector for the JABLOTRON 100+ system. It provides 90°/12 m detection coverage, two selectable false-alarm immunity levels and control of programmable PG outputs for indoor protection.
Reference: JA-120PC
Brand: JABLOTRON ALARMS S.A.
Bus-powered PIR motion detector with an integrated verification camera. Captures colour stills in LQ 320×240 and HQ 640×480, uses flash and IR for night shots, stores images in internal memory and occupies one address in the JABLOTRON 100 system.
Reference: JA-120PB
Brand: JABLOTRON ALARMS S.A.
JA-120PB is a BUS combined detector integrating a PIR motion sensor and an acoustic/pressure GBS glass‑break sensor in one enclosure. Designed for indoor protection, it occupies two addresses on the JABLOTRON 100 bus. PIR 110°/12 m, GBS up to 9 m.
Reference: JA-180W
Brand: JABLOTRON ALARMS S.A.
The JA-180W is an addressable wireless motion detector combining a passive PIR sensor and a 9.35 GHz MW module. PIR-triggered MW confirmation reduces false alarms; detection can be tuned with JS-7904, JS-7906 or JS-7901 lenses.
Reference: JA-122PW
Brand: JABLOTRON ALARMS S.A.
JA-122PW is a BUS device for the JABLOTRON 100+ system combining passive infrared (PIR) and microwave (MW) detection to reduce false alarms. Low power consumption, operates at 12 V DC (9–15 V); recommended mounting 2.2–2.5 m.
Reference: JA-162PW
Brand: JABLOTRON ALARMS S.A.
The JA-162PW is a wireless dual PIR & MW motion detector that confirms PIR activations with its microwave sensor to minimize false alarms. Designed for indoor use in the JABLOTRON 100+ system with detection range up to 12 m.
Reference: JA-162PW (G)
Brand: JABLOTRON ALARMS S.A.
JAB JA-162PW (G) is a wireless dual PIR & MW motion detector for Jablotron 100+ that minimises false alarms by requiring MW confirmation after PIR trigger. Grey lens gives white‑light immunity up to 10,000 lux; detection up to 12 m. Powered by 2×CR123A.
Reference: JA-122PW (G)
Brand: JABLOTRON ALARMS S.A.
JA-122PW (G) is a JABLOTRON 100+ bus dual PIR & MW motion detector combining PIR and microwave sensing for reliable coverage up to 12 m. The grey lens improves white‑light immunity to 10000 lux; PIR and MW sensitivity are adjustable separately.
Reference: JA-112P-AN
Brand: JABLOTRON ALARMS S.A.
Addressable bus PIR motion detector for the JABLOTRON 100+. Provides 90°/12 m coverage, impulse activation and two-level false-alarm adjustment. Suitable for indoor use and compatible with F‑Link 2.0.0 and higher.
Reference: JA-112P-GR
Brand: JABLOTRON ALARMS S.A.
JA-112P-GR is an addressable BUS PIR motion detector for the JABLOTRON 100+. It detects human movement indoors with a guaranteed coverage of 90° and range up to 12 m. Features include impulse reporting, two‑level false‑alarm immunity and white‑light resistance up to 6000 lux.
Reference: JA-152P-GR
Brand: JABLOTRON ALARMS S.A.
The JA-152P-GR is an addressable wireless PIR motion detector for the JABLOTRON 100+ system. It provides 90°/12 m coverage, two levels of false‑alarm immunity, PG output control and runs on a CR123A battery with up to 4 years typical life.