Wireless PIR and GB combined detector JA-180PB View larger

Wireless PIR and GB combined detector JA-180PB

JA-180PB

New product

JABLOTRON ALARMS S.A.

The JA-180PB is a combined wireless detector integrating a PIR motion sensor and a glass‑break (GB) sensor in one housing. Addressable in JABLOTRON 100 (occupies two addresses), 868.1 MHz communication, range ≈300 m (open area).

More details

Data sheet

Connection method Wireless

More info

JA-180PB – wireless PIR and glass‑break combined detector

The JA-180PB integrates a passive infrared (PIR) motion detector and an acoustic/pressure‑assisted glass‑break sensor in a single enclosure. Each sensor is enrolled separately and the unit occupies two addresses in the JABLOTRON 100 alarm system, allowing independent monitoring and configuration of the PIR and GB functions.

The glass‑break function uses a dual‑stage method: it first senses rapid air‑pressure changes and then performs sound analysis to reduce false alarms. The GB sensitivity is adjustable. Detection patterns of the PIR segment can be fine‑tuned using alternative lenses JS-7904 (LONG HALLWAY), JS-7906 (PET) or JS-7901 (CURTAIN).

Designed for indoor installation with a recommended mounting height of 2.0–2.5 m. The PIR covers a 120° angle up to 12 m (standard lens). The glass‑break detector covers up to 9 m for glass with a minimum size of 60 × 60 cm.

Technical highlights

  • PIR power: lithium battery CR14500 (AA) 3.6 V.
  • GB power: lithium battery CR14250 (½AA) 3.6 V.
  • Typical battery lifetime: approx. 3 years (depends on usage).
  • Communication: 868.1 MHz (Jablotron protocol); range ≈ 300 m in open area.
  • PIR detection: 120° / 12 m; glass‑break range: 9 m (glass ≥ 60×60 cm).
  • Dimensions / weight: 110 × 60 × 55 mm; 120 g.
  • Operating temperature: -10 °C to +40 °C; classification: Grade 2, Environmental class II.
  • Standards / compliance: EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-2-7-1, ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1.

The unit includes a tamper switch and an NC input for an external contact sensor (e.g. door/window). Battery replacement should be carried out in SERVICE mode by qualified personnel and followed by a functional test. Perform a radio‑link test on site to verify communication reliability in the installation environment.

Download

Accessories

  • Reference: BAT-3V6-1/2AA-LS

    Lithium battery BAT-3V6-1/2AA-LS

    BAT-3V6-1/2AA-LS is a primary 1/2 AA (14250) lithium cell with nominal voltage 3.6 V and typical capacity ≈1.2 Ah. Li‑SOCl2 chemistry provides long shelf life, low self-discharge and reliable low-temperature performance for alarm sensors and low‑drain modules.

  • Reference: BAT-3V6-AA-LS

    Lithium battery  BAT-3V6-AA-LS

    Primary lithium cell LS(T)14500 (AA/CR14500), nominal 3.6 V, 2.45 Ah. Designed for security and alarm devices: long shelf life, low self-discharge and reliable performance at low temperatures.

30 other products in the same category:

Follow us on Facebook