JAB Modul za spajanje   Ei208W(D) CO detektora, bežični JA-150G-CO View larger

Module for CO detector JA-150G-CO

JA-150G-CO

New product

JABLOTRON ALARMS S.A.

The JA-150G-CO is a plug‑in wireless radio module for direct installation into a standalone Ei208W or Ei208DW CO detector. It connects the detector to the JABLOTRON 100+ system and transmits alarm events, test activations and battery status.

More details

Data sheet

Connection method Wireless

More info

JA-150G-CO is a compact plug‑in radio interface designed to be installed directly into a standalone Ei208W or Ei208DW carbon monoxide detector. Once fitted, the detector communicates wirelessly with the JABLOTRON 100+ control panel and reports key detector events.

The module transmits alarm activations (CO detection), manual/test activations and the detector battery status. It is addressable and occupies one address slot within the system.

Power for the module is supplied from the Ei208(D)W detector battery, so no separate power source is required. Communication is on 868.1 MHz using the Jablotron protocol; maximum RF power (ERP) is 6 mW and the approximate open‑area range is 300 m.

Key technical data:

  • Power: from Ei208(D)W battery
  • Communication frequency: 868.1 MHz (Jablotron protocol)
  • Maximum RF power (ERP): 6 mW
  • RF range: ≈ 300 m (open area)
  • Dimensions: 109 × 24 × 22 mm
  • Operating temperature: -10 °C to +40 °C
  • Environmental class: II (indoor, EN 50131-1)

Application: the module is intended for installations where a standalone Ei208W/D CO detector must be integrated into a Jablotron alarm system without wiring. Check detector version compatibility and follow Ei and Jablotron installation procedures when fitting and enrolling the device.

Recommendation: when replacing end‑of‑life detectors, consider replacing the detector and radio module together to avoid possible incompatibilities with older equipment.

Download

30 other products in the same category:

Follow us on Facebook